AFM03B OEM Ultra-Soft Easy-Fit Fan Mounts qty 100 (25 fans) $54.37 1,233 in stock | ||
AFM03B Ultra-Soft Easy-Fit Fan Mounts, qty 8 (2 fans) $4.20 116 in stock | ||
More variations available Show |
Acousti Ultra-Soft Easy-Fit Silicone Fan Mounts AFM03B
Sometimes the cheapest solutions are the best, and these super-soft silicone fan mounts definitely fall into that category. They don’t cut down on air noise due to high fan speed, but for preventing low frequency fan rumble they are worth every penny.
See also: AFM02B Flush-Fit Fan Mounts
Features
- Extra-soft black silicone gives optimal fan noise reduction
- Compatible with all fans with standard mounting holes
- Easy to fit and remove - no case modifications required
- Excellent value for money and long-lasting (durable and tearproof)
Why are Fan Mounts Necessary?
Vibration from fan motors can travel into a PC case and become amplified when a fan is fitted tightly. This unwanted ‘vibrational’ noise is an issue if you wish to build a very quiet or virtually silent PC. These mounts have been designed ‘from the drawing-board’ specifically to tackle fan-induced vibrational noise! Acousti Ultra-Soft Fan Mounts are a ‘no-vibration’ alternative to standard fan screws or hard plastic push pins.
To prevent the transmission of vibrations from a motor (such as a fan motor), the vibrating part needs to be decoupled (or disengaged) from the case, and the vibrations need to be damped, that is, attenuated. Acousti Products have selected an ultra-soft silicone polymer that effectively decouples the fan and also attenuates unwanted vibration. Both the shape and materials have been designed together to give a widely compatible fan mount.
These mounts are made from an ultra-soft silicone polymer because it is softer and more chemically stable than cheaper alternatives like rubber or EPDM. Ultra-soft silicone is non-toxic, more chemically stable, and can also tolerate higher temperatures - so it is a superior material for this application.
AFM03B Fan Mount Design. The fan mount has been designed with smoothed corners to prevent the propagation of cracks when stretched. When in position, the fan is held 1.25mm away from the case side - this is just enough to allow free movement of the fan and effectively absorb vibrations, but not too much to cause excessive air pressure loss around the fan.
Compatibility
Please note that this product is only compatible with flange type fans. This is because flange type fans (shown below) do not have a ‘tunnel’ connecting the mounting holes like Rib type fans. Flange type design is the most popular type of fan moulding used in PCs & servers. For rib-type fans, we recommend gaskets rather than fan mounts, which will give equally good performance. centre.
Fitting Instructions
The AFM03B fan mounts need to be fitted to the fan first, and then the fan assembly fitted to the fan mounting holes. This makes the AFM03B model easier to fit in restricted spaces and therefore may be more suitable for OEM and IT System Builders.
Specifications | AFM03B x 100 | AFM03B x 8 |
---|---|---|
Fan Type | Designed to fit Flange Type fans | Designed to fit Flange Type fans |
Range of Fan Mounting Holes | 4.0 - 5.25mm diameter | 4.0 - 5.25mm diameter |
Range of Case Mounting Holes | 4.0 - 5.5mm diameter | 4.0 - 5.5mm diameter |
Maximum recommended panel thickness | 1.8 mm | 1.8 mm |
Length | 35mm, Largest Diameter:8.0mm | 35mm, Largest Diameter:8.0mm |
Max. Elongation | 100% | 100% |
Weight each | 0.4 g | 0.4 g |
Colour | Matt Black | Matt Black |
Material | Ultra-Soft Silicone Dampening Polymer | Ultra-Soft Silicone Dampening Polymer |
Toxicity | Non-toxic | Non-toxic |
REACH environmental compliance | Yes | Yes |
Normal Operating Temperature Range | -20°C to +70°C | -20°C to +70°C |
Warranty | 24 months | 24 months |
EAN barcode | 5060087740133 | 5060087740386 |
Specifications | AFM03B x 100 | AFM03B x 8 |
---|---|---|
Fan Type | Designed to fit Flange Type fans | |
Range of Fan Mounting Holes | 4.0 - 5.25mm diameter | |
Range of Case Mounting Holes | 4.0 - 5.5mm diameter | |
Maximum recommended panel thickness | 1.8 mm | |
Length | 35mm, Largest Diameter:8.0mm | |
Max. Elongation | 100% | |
Weight each | 0.4 g | |
Colour | Matt Black | |
Material | Ultra-Soft Silicone Dampening Polymer | |
Toxicity | Non-toxic | |
REACH environmental compliance | Yes | |
Normal Operating Temperature Range | -20°C to +70°C | |
Warranty | 24 months | |
EAN barcode | 5060087740133 | 5060087740386 |
Product Resources
Top Fan Accessories
Acousti AFG120B Anti-vibration 120mm Fan Gasket
Acousti AFM02B OEM Ultra-Soft Flush-Fit Fan Mounts qty 100 (25 fans)
Gelid PWM Y Cable, Connect two PWM fans to one socket
Gelid PWM Adaptor Cable for VGA Cooler Fans
Acousti AFG92B Anti-vibration 92mm Fan Gasket
Acousti OEM-AFG120B 32 Black Anti-vibration 120mm Fan Gaskets
Acousti AFM03B OEM Ultra-Soft Easy-Fit Fan Mounts qty 100 (25 fans)
Noctua NA-FC1 PWM Fan Controller
Noctua NA-FG1-14 Sx5 140mm Fan Grille, 5 pcs
Gelid PCI Slot Fan Holder with two slim 120mm UV Blue Fans